After the yoke pattern was worked with threads, small antique golden beads and red zardosi tubes were stitched on to the yoke. A part of the yoke-


The other part of the yoke after working the zardosi embroidery.


The pictures are not very clear.
The completed yoke, placed on the tunic fabric looks like this-


The sewn tunic with zardosi yoke.


Close up of the tunic.


I have worn this tunic with red salwar[Indian pants]. The block print pattern on this tunic is very rare. It impressed me a lot. it can worn be as saree, shirt, short top and other western dresses also. The fabric was transparent and required lining, for that matter. I find any white based fabric requires lining.
I looked for inspiration from traditional Indian patterns and drew this yoke pattern.

The embroidery details of the yellow yoke on white chanderi tunic. After working with green colour threads, I started with red colour thread. This being the colour of the zardosi beads, the outlines were worked stem stitch and chain stitch in this colour. The central part of the design was worked in satin stitch and straight stitch. The picture is not very clear though,


With the tunic fabric in white, the rest of the design was worked in white thread. The stems were done in white along with other small details.


The zardosi details on my next post.

While shopping for tunic fabrics, I found this white block printed chanderi fabric.


It had small zari border.which is not seen here.. I had some zardosi tubes in red, which I wanted to use on this tunic. With white background, I cannot use white fabric for yoke, light green colour was very minimal on the tunic to be used for yoke, so the decision was to use golden yellow fabric for yoke.
This was a traditional Indian pattern, it is easier to incorporate zardosi on these type of patterns.
I started the work with gold colour silk thread. Satin stitches, straight stitches and chain stitch were done with this thread.


The next colour silk thread was olive green, and the light green was done in cotton skein. Leaf stitch, stem stitch and buttonhole stitch were done with these threads.


The embroidery on yoke is fully completed and the yoke is sewn on to the tunic.

blue/green tunic-1

Another picture-

blue/green tunic-2

The yoke is 16 inches in height and 11 inches in width.

After completing this tunic, I observed that I had used too many printed material . It would have been better if one of them was plain.
Another aspect, is I should have used complimenting fabrics for yoke and tunic, it might have enhanced the total project. I keep learning in each and every project I work.
On my next post where I tried contrasting the yoke fabric.

The large yoke is completed with beige thread and pink sequins.The sequins were last minute additions. The completed yoke-

blue/green tunic-yoke completed

I placed the embroidered yoke on the tunic to see the effect.

blue/green tunic yoke

The completed tunic on my next post.