This week’s stitch on SSS challenge is lace stitch or three sided stitch. This stitch comes under pulled thread embroidery. The working is on Queenie’s blog. Earlier in this challenge we had four sided stitch. The samples of four sided stitch were worked as any counted thread stitch and not as pulled thread work. Needing to expand my skill, I have decided to work this stitch as pulled thread work.
Started to learn this stitch on mati cloth. The fabric is far more accommodative than I expected.
12-lace3sidst-s1
Then tried the stitch on a linen bought from IKEA. This is not the effect I want.
12-lace3sidst-s2
Mati cloth it is.
An idea to work the samples along with some borders seems like a good one at this point. Maybe it is better to work within a specified area. Then what about looking for some frames which can be used for this?
The frame
12lace3sidst-frame
Measured the area to be worked and started with the first sample.
12-lace3sidst-1
The pattern for this. It is the basic three sided stitch. The black dots are were the fabric is pulled and create holes.
12-lace3sidst-1pat
Two rows of three sided stitch worked together looks like this-
12-lace3sidst-2
The pattern
12-lace3sidst-2pat
The idea for this sample occurred while learning the stitch on matti cloth.
12-lace3sidst-3
The pattern. Each hexagon need not be connected. That’ll make another variation.
12-lace3sidst-3pat
Three sided stitch worked on both sides of this black work pattern.
12-lace3sidst-4
The pattern
12-lace3sidst-4pat
These squares are not connected.
12-lace3sidst-5
The pattern
12-lace3sidst-5pat
The stitches are worked diagonally.

12-lace3sidst-6
The pattern
12-lace3sidst-6pat
The sampler is completed. A picture of the sampler was also taken. It was not easy to insert the sampler inside the frame. The problem was not foreseen. After uploading the images, noticed that the sampler image was blurred. I did not want to take it out and insert it again. The framed sampler-
12-lace-or-3-sided-stitch-sampler
It was very exciting to work on this sampler. I had tried pulled thread work when working on sumptuous surfaces class. But three sided stitch was tried for the first time on this challenge.
The matti cloth cooperated well.
The stitch itself is versatile.
I could work on another Stitch A Long in this project which was not happening for quite some time.
It was interesting learning process to fit the sampler within  the frame.
I could complete the work.

It was a good pastime to see designed stitch samplers on the net. Even though this is small piece I am happy to do this.

Advertisements

The Seba designs black work pattern was used for ornament. The design was meant for cube ornament. Instead of working six times to make a cube, I worked the second design into a square ornament. This was started the previous week and completed during this week. Oval shaped red stones were attached to this black work pattern, this was not part of the design.

WIPW75-squareornament[14]-2

WIPW75-squareornament[14]-2


The completed ornament.
WIPW75-squareornament[14]-3

WIPW75-squareornament[14]-3


This week’s edge on RPW2016 was completed on Saturday. The details are here.
The TAST challenge has started with a new stitch, meaning, I haven’t worked this stitch before. Yet to get ideas for working this stitch.
I have this grey silk crepe fabric, on which Kashmiri chain stitch embroidery has to be started. The designs for front and sleeves are ready to be traced with white carbon. This embroidery is similar to some ethnic European embroidery which are mainly worked in open chain stitch. I find chain stitch easier to work with, especially when this fabric does not lend itself to hoop, which stretches the fabric and create holes! The fabric-

WIPW75-greytunickashmiri-1

WIPW75-greytunickashmiri-1

The cube ornament worked in Seba designs Black work was completed. The designer is posting a design every week. Three designs have been posted so far on facebook group. Few people have been participating in this SAL. The designs are intricate and beautiful. The cube –

WIPW74-cubeornament[14]-4

WIPW74-cubeornament[14]-4

I started with the second design. The same square pattern needs to be worked six times to make a cube. This time it is not a cube ornament but a square ornament. The design needs to be worked twice. Saves time too. This is worked on 14 count Aida with anchor cotton skein and variegated fine silk thread. Hope this project is worked during the following week.

WIPW74-squareornament[14]-1

WIPW74-squareornament[14]-1

A few more kutch work borders were drawn in the last two evenings for kutch work border designs collection.

An idea of working Kashmiri embroidery [chain stitch] on crepe silk fabric is at the searching for the right design stage. Will be happy to start the embroidery on this project next week.

I caught a viral infection on Sunday and was quite sick and weak. With antibiotics and paracetamol feeling slightly better today. My husband was also affected by this stupid virus.
Now to see the progress made during this last week of this year.
Square ornament
The black work pattern by SEBA designs was worked on 18 count Aida cloth with single strand of Anchor skein. This was a Christmas present for a close friend. Pink stones and pearl beads were added as embellishments.

WIPW73-Squareornament[18]

WIPW73-Squareornament[18]


The work on the cube ornament on 14 count Aida was resumed after this project. The embroidery was completed. Now these have to be brought into cube shape. First time attempting a cube. Feel quite anxious and excited.

WIPW73-cube ornament[14]

WIPW73-cube ornament[14]


Saturday was RPW day. Two different edges this week. Started on these and BLOP! fell sick. They will be resumed next year.

WIPW73-RPW2015

WIPW73-RPW2015

HAPPY NEW YEAR!

Some progress was made during this week on this black work cube ornament on 14 count Aida. Though a fan of Seba designs, this is the first time I am trying one of her patterns. Either this pattern is very intricate or I have difficulty working on it, this is taking quite a bit of time to work. I used Anchor variegated cotton skein.

WIPW72-cube ornament[14]bw1-2

WIPW72-cube ornament[14]bw1-2


The same design is started on 18 count Aida fabric also. This is for a square ornament. This is more difficult.

The earlier weeks randjes were completed. The blog which is running this challenge seems to be well set for 2016. The next year’s challenge is a long sampler including alphabets, which will be posted in parts every week.

WIPW71-RPW2015

WIPW71-RPW2015

This project is a cube ornament. The black work pattern for this ornament is posted on a facebook group. Many people would be familiar with Seba Designs. This is stitch a long. This is my first SAL. Started the outlines with double running stitch. This is done on 14 count Aida.

WIPW71-cube ornament[14]bw1

WIPW71-cube ornament[14]bw1

This past week was very hectic with embroidery on two saree blouses. A black work design was chosen for the second blouse in peach silk. After working on the black work pattern. Certain elements were worked in metallic thread similar to Aari work. Gold beads were added as embellishments.
A few more colour threads were used on black silk blouse. Totally there are 8 colours on the black blouse. The peach silk was completed yesterday. The black blouse was completed today.
We are leaving for India for a week. Our friend’s daughter is getting married. My mother is not feeling well.
This year Oman is celebrating its 45th national day. Starting from 18th this whole week will be a festival. If time permits, blogging on earlier worked tunics may be done.